| 6931 |
OMNICOLL fraction collector_sampler, programmable accessories: PEEK tubing connector for the connection of PTFE tubing and 3_5 mm silicone tubing |
|
148-Eur |
Lamda |
|
| RTA-1 |
MIcroRT tubing aligner, for easy alignment of MicoRT tubing onto goniometer base |
1 |
163-Eur |
MiTeGen |
|
| ADPT-3mm1/8 |
Allows use of 3mm stainless steel tubing (typical in metric countries) to supply air to pressure cells. Fits into a 1_8 inch female tubing outlet. |
|
79-Eur |
Next Advence |
|
| 108D TC-1 |
Tubing coupler for Glove Bag, for 3_8" tubing |
50 |
180-Eur |
Glcol |
|
| 108D TC-1 |
Tubing coupler for Glove Bag, for 3 8" tubing |
x5 |
63-Eur |
Glcol |
|
| RTA-1 |
MicroRT tubing aligner, for easy alignment of MicroRT tubing onto goniometer base |
tool |
154-Eur |
MiTeGen |
|
| RTA-1 |
MicroRT tubing aligner, for easy alignment of MicroRT tubing onto goniometer base |
1 tool |
154-Eur |
MiTeGen |
|
| HPREG |
100 - 1500 psi operating pressure, 3000psi maximum inlet pressure. CGA580 inlet fitting and 1_8" stainless steel tubing outlet fitting (3mm tubing outlet fitting available upon request). |
|
662-Eur |
Next Advence |
|
| FN-0002 |
For 2 mm tubing |
|
71-Eur |
Capp |
|
| FN-0004 |
For 4 mm tubing |
|
71-Eur |
Capp |
|
| FN-0001 |
For 0.5 and 1 mm tubing |
|
71-Eur |
Capp |
|
| 11-650-14 |
Tubing Clamps |
14.5 cm, 5,1/2" x10 |
131-Eur |
AJMAL |
|
| RT-T1 |
MicroRT Tubing Kit |
1Kit |
105-Eur |
Jena Bioscience |
assays |
| 1296120 |
Tubing Set |
|
369-Eur |
Atto |
|
| 11-650-14 |
Tubing Clamps |
14.5 cm, 5,1/2" x 50 |
303-Eur |
AJMAL |
|
| FN-0006 |
For 6 mm tubing |
|
71-Eur |
Capp |
|
| FN-0008 |
For 8 mm tubing |
|
71-Eur |
Capp |
|
| FN-0101 |
For 0.5 and 1 mm tubing |
|
47-Eur |
Capp |
|
| LM-1 |
siliconing tubing 1 mm 5 mtr. |
|
119-Eur |
Capp |
|
| LM-2 |
siliconing tubing 2 mm 5 mtr. |
|
125-Eur |
Capp |
|
| LM-003 |
siliconing tubing 0,3 mm 5 MTR. |
|
172-Eur |
Capp |
|
| LM-4 |
siliconing tubing 4 mm 5 mtr. |
|
179-Eur |
Capp |
|
| LM-6 |
siliconing tubing 6 mm 5 mtr. |
|
204-Eur |
Capp |
|
| 1296120 |
Tubing Set
|
|
4124-Eur |
Atto |
|
| LM-05 |
siliconing tubing 0,5 mm 5 MTR. |
|
119-Eur |
Capp |
|
| FN-0102 |
For 2 mm tubing |
|
47-Eur |
Capp |
|
| FN-0104 |
For 4 mm tubing |
|
47-Eur |
Capp |
|
| FN-0106 |
For 6 mm tubing |
|
47-Eur |
Capp |
|
| FN-0108 |
For 8 mm tubing |
|
47-Eur |
Capp |
|
| LM-8 |
siliconing tubing 8 mm 5 mtr |
|
257-Eur |
Capp |
|
| 748016-1017 |
TUBING PE 1.7 MM X 10 FT |
Case Qty: 1 x 10 |
103-Eur |
Kleinfeld Labortechnik |
|
| 11-660-18 |
GUNNAR-HEY Tubing Clamps |
18.5 cm, 7,1/4" x10 |
181-Eur |
AJMAL |
|
| 11-654-16 |
PRESBYTERIAN Tubing Clamps |
16.5 cm, 6,1/2" x 50 |
352-Eur |
AJMAL |
|
| 748016-0017 |
TUBING PE 1.7 MM X 100 FT |
Case Qty: 1 |
98-Eur |
Kleinfeld Labortechnik |
|
| 70-300T6 |
Silicon Tubing I.D. 3 per 8in. |
25 Feet/Unit |
309-Eur |
Genesee |
|
| 800100-35 |
Silicone tubing 3_5 mm, 10 m |
|
55-Eur |
Lamda |
|
| 800100-48 |
Silicone tubing 4_8 mm, 5 m |
|
52-Eur |
Lamda |
|
| MTF-124 |
Vaccum connection tubing |
1 |
97-Eur |
Cleaver |
|
| MTF-125 |
Pressure connection tubing |
1 |
213-Eur |
Cleaver |
|
| 800100-36 |
Silicone tubing 3_6 mm, 5 m |
|
48-Eur |
Lamda |
|
| 11-654-16 |
PRESBYTERIAN Tubing Clamps |
16.5 cm, 6,1/2" x10 |
138-Eur |
AJMAL |
|
| 11-660-18 |
GUNNAR-HEY Tubing Clamps |
18.5 cm, 7,1/4" x 20 |
311-Eur |
AJMAL |
|
| MTF-125 |
Pressure connection tubing |
|
192-Eur |
Cleaver |
|
| 4815-1 |
Silicone tubing 0.5_2.5mm x 10m |
|
81-Eur |
Lambda Laboratory Instruments |
|
| 800100-48 |
Silicone tubing 4_8 mm, 5m |
|
81-Eur |
Lambda Laboratory Instruments |
|
| MTF-124 |
Vaccum connection tubing |
|
87-Eur |
Cleaver |
|
| 800517 |
PTFE tubing 1.8mm x 1m |
|
64-Eur |
Lambda Laboratory Instruments |
|
| 800100-36 |
Silicone tubing 3_6 mm, 5m |
|
77-Eur |
Lambda Laboratory Instruments |
|
| 800100-35 |
Silicone tubing 3_5 mm, 10m |
|
84-Eur |
Lambda Laboratory Instruments |
|
| MS-RCP |
Rubber tubing clamp |
|
56-Eur |
Cleaver |
|
| 46155-99 |
TUBING PTFE 1 4"OD 10 FT |
Case of 1 |
109-Eur |
COREX |
|
| 70-300T3 |
Silicon Tubing I.D. 1 per 8in. |
25 Feet/Unit |
210-Eur |
Genesee |
|
| W-1000 |
silicon tubing 1 mtr |
|
45-Eur |
Capp |
|
| 70-300T5 |
Silicon Tubing I.D. 1 per 4in. |
25 Feet/Unit |
268-Eur |
Genesee |
|
| 4815-3 |
Silicone tubing 2_4mm x 10m |
|
84-Eur |
Lambda Laboratory Instruments |
|
| 4815-2 |
Silicone tubing 1_3mm x 10m |
|
81-Eur |
Lambda Laboratory Instruments |
|
| FN-0104 |
Suction needle, for 4 mm tubing |
|
----Eur |
Capp |
|
| 4815-4 |
Silicone tubing 3_5mm x 10m |
|
84-Eur |
Lambda Laboratory Instruments |
|
| 07.811.01 |
Rplcmt. Tips + Tubing 1 Pack |
1 |
58-Eur |
Claremont Bio |
|
| FN-0004 |
Filling needle, for 4 mm tubing |
|
----Eur |
Capp |
|
| 07.811.05 |
Rplcmt. Tips + Tubing 5 Pack |
5 |
57-Eur |
Claremont Bio |
|
| 800517 |
PTFE tubing ext. diam. 1.8 mm (1 m) |
|
34-Eur |
Lamda |
|
| 70-300T6 |
Silicon Tubing I.D. 3_8in. |
25 Feet/Unit |
301-Eur |
Genesee |
|
| 70-300T3 |
Silicon Tubing I.D. 1_8in. |
25 Feet/Unit |
205-Eur |
Genesee |
|
| RT-T1 |
MicroRT(TM) Tubing Kit contains 20 polyester tubes |
1Box |
88-Eur |
Jena Bioscience |
assays |
| MTF-126 |
Dual pressure connection tubing |
|
425-Eur |
Cleaver |
|
| 11-666-15 |
TUBING CLAMP WITHOUT SAFETY GUARD |
15 cm,6" x10 |
143-Eur |
AJMAL |
|
| 11-666-18 |
TUBING CLAMP WITHOUT SAFETY GUARD |
18 cm,7" x10 |
149-Eur |
AJMAL |
|
| 11-666-20 |
TUBING CLAMP WITHOUT SAFETY GUARD |
20 cm, 8" x10 |
153-Eur |
AJMAL |
|
| 11-668-15 |
TUBING CLAMP WITHOUT SAFETY GUARD |
15 cm,6" x10 |
148-Eur |
AJMAL |
|
| FN-0001 |
Filling needle for 0,5 and 1 mm tubing |
|
106-Eur |
Capp |
|
| 11-668-18 |
TUBING CLAMP WITHOUT SAFETY GUARD |
18 cm,7" x10 |
153-Eur |
AJMAL |
|
| FN-0002 |
Filling needle for 2 mm tubing |
|
106-Eur |
Capp |
|
| TBNG10 |
10 ft 1_8 in. Stainless Steel Tubing |
|
171-Eur |
Next Advence |
|
| 70-300T1 |
Silicon Tubing I.D. 1_32in. |
25 Feet/Unit |
180-Eur |
Genesee |
|
| 70-300T2 |
Silicon Tubing I.D. 1_16in. |
25 Feet/Unit |
189-Eur |
Genesee |
|
| FN-0004 |
Filling needle for 4 mm tubing |
|
106-Eur |
Capp |
|
| FN-0006 |
Filling needle for 6 mm tubing |
|
106-Eur |
Capp |
|
| FN-0008 |
Filling needle for 8 mm tubing |
|
106-Eur |
Capp |
|
| 70-300T4 |
Silicon Tubing I.D. 3_16in. |
25 Feet/Unit |
261-Eur |
Genesee |
|
| 4815-5 |
Silicone tubing 4_6mm x 10m |
|
72-Eur |
Lambda Laboratory Instruments |
|
| MTF-126 |
Dual pressure connection tubing |
1 |
469-Eur |
Cleaver |
|
| 4815-5v |
Viton tubing 4_6mm x 5m |
|
132-Eur |
Lambda Laboratory Instruments |
|
| 3511068 |
Teflon tubing with fitting, 20 cm |
|
114-Eur |
Atto |
|
| 11-666-15 |
TUBING CLAMP WITHOUT SAFETY GUARD |
15 cm,6" x 50 |
385-Eur |
AJMAL |
|
| 11-666-18 |
TUBING CLAMP WITHOUT SAFETY GUARD |
18 cm,7" x 50 |
421-Eur |
AJMAL |
|
| 11-666-20 |
TUBING CLAMP WITHOUT SAFETY GUARD |
20 cm, 8" x 20 |
238-Eur |
AJMAL |
|
| 11-668-18 |
TUBING CLAMP WITHOUT SAFETY GUARD |
18 cm,7" x 20 |
238-Eur |
AJMAL |
|
| 11-668-20 |
TUBING CLAMP WITHOUT SAFETY GUARD |
20 cm, 8" x 20 |
246-Eur |
AJMAL |
|
| 11-668-20 |
TUBING CLAMP WITHOUT SAFETY GUARD |
20 cm, 8" x10 |
156-Eur |
AJMAL |
|
| |
EpiSonic Flow Tubing (2_set) |
|
114-Eur |
EpigenTek |
|
| 6922 |
Magnetic tubing guide |
|
73-Eur |
Lambda Laboratory Instruments |
magnetic |
| 70-300T1 |
Silicon Tubing I.D. 1 per 32in. |
25 Feet/Unit |
184-Eur |
Genesee |
|
| 800100-610 |
Silicone tubing 6_10 mm, 5m |
|
84-Eur |
Lambda Laboratory Instruments |
|
| 6916 |
PTFE tubing ext. diam. 1.8 mm (5 m) |
|
208-Eur |
Lambda Laboratory Instruments |
|
| 800100-610 |
Silicone tubing 6_10 mm, 5 m |
|
55-Eur |
Lamda |
|
| 3511068 |
Teflon tubing with fitting, 20 cm
|
|
266-Eur |
Atto |
|
| 70-300T2 |
Silicon Tubing I.D. 1 per 16in. |
25 Feet/Unit |
193-Eur |
Genesee |
|
| 11-668-15 |
TUBING CLAMP WITHOUT SAFETY GUARD |
15 cm,6" x 50 |
417-Eur |
AJMAL |
|
| SA00017 |
Tubing and Insulation set for CSL-CHILLER |
1 |
176-Eur |
Cleaver |
|
| 70-300T4 |
Silicon Tubing I.D. 3 per 16in. |
25 Feet/Unit |
268-Eur |
Genesee |
|
| 70-300T5 |
Silicon Tubing I.D. 1_4in. |
25 Feet/Unit |
261-Eur |
Genesee |
|
| SA00017 |
Tubing and Insulation set for RELS-CHILLER |
|
285-Eur |
Durviz |
|
| 109A 11-06005 |
1_4" OD x 1_8" ID silicone tubing - 3' piece |
10 |
128-Eur |
Glcol |
|
| 108D PT12 |
12" diameter polyethylene tubing |
10 |
115-Eur |
Glcol |
|
| 96-MTK700 |
COBAS MIRA CONSUMABLES: ISE Tubing Kit |
1 Kit |
160-Eur |
Pointe scientific |
|
| 479418-0043 |
Tubing Kit for Ammonia_Phenol with Fittings |
Case Qty:1 |
470-Eur |
Kleinfeld Labortechnik |
|
| 11-625-11 |
Towel Calmps with clip for tubing or cable |
11c m, 4,1/2" x 50 |
352-Eur |
AJMAL |
|
| 109A 11-06005 |
1 4" OD x 1 8" ID silicone tubing - 3' piece |
x5 |
80-Eur |
Glcol |
|
| 11-625-13 |
Towel Calmps with clip for tubing or cable |
13 cm, 5" x 50 |
385-Eur |
AJMAL |
|
| 420823-0014 |
TUBING PTFE 1_4"OD 10_FT |
Case Qty: 1 |
104-Eur |
Kleinfeld Labortechnik |
|
| 479215-0152 |
TUBING REINFORCED VACUUM |
Case Qty: 1 x 10 |
361-Eur |
Kleinfeld Labortechnik |
|
| 41120-73 |
Cellulose Dialyzer Tubing VT809 CAS: |
3M |
305-Eur |
Nacalai |
|
| 41121-34 |
Cellulose Dialyzer Tubing VT351 CAS: |
7.5M |
393-Eur |
Nacalai |
|
| 479418-0046 |
Tubing Kit for Cyanide with Fittings |
Case Qty:1 |
685-Eur |
Kleinfeld Labortechnik |
|
| 11-625-13 |
Towel Calmps with clip for tubing or cable |
13 cm, 5" x10 |
143-Eur |
AJMAL |
|
| 41119-13 |
Cellulose Dialyzer Tubing VT804 |
3m |
213-Eur |
Nacalai |
|
| 07.812.04 |
EZ Rplcmt. Ribbon Tips + Tubing 4 Pack |
4 |
84-Eur |
Claremont Bio |
|
| 96-MTK700 |
COBAS MIRA CONSUMABLES ISE Tubing Kit |
1 Kit |
168-Eur |
Pointe scientific |
|
| RVDIA03641000079 |
Instruments, TUBING, AIR PRESSURE CONN. |
1 pce |
113-Eur |
DIAsource |
|
| 748016-1017 |
TUBING PE 1.7 MM X 10 FT Prod. Code P |
1 |
56-Eur |
Kimble chase Kontes |
|
| 41117-04 |
Cellulose Dialyzer Tubing VT802 |
7.5m |
220-Eur |
Nacalai |
|
| 748016-0017 |
TUBING PE 1.7 MM X 100 FT Prod. Code P |
1 |
130-Eur |
Kimble chase Kontes |
|
| 41116-14 |
Cellulose Dialyzer Tubing VT801 |
7.5m |
197-Eur |
Nacalai |
|
| 41121-34 |
Cellulose Dialyzer Tubing VT351 |
7.5m |
413-Eur |
Nacalai |
|
| 420823-0018 |
TUBING PTFE 1_8"OD 10_FT |
Case Qty: 1 x 10 |
337-Eur |
Kleinfeld Labortechnik |
|
| 6925 |
O_ring for tubing fixing (5 pces) |
|
96-Eur |
Lambda Laboratory Instruments |
|
| 800115 |
Double_seal conical insert for tubing |
|
71-Eur |
Lambda Laboratory Instruments |
|
| 800113 |
Stainless steel tubing clamp |
|
43-Eur |
Lambda Laboratory Instruments |
|
| 800030 |
Air input tubing holder (PEEK) |
|
121-Eur |
Lambda Laboratory Instruments |
|
| 800113 |
Stainless steel tubing clamp |
|
43-Eur |
Lambda Laboratory Instruments |
|
| 11-625-11 |
Towel Calmps with clip for tubing or cable |
11c m, 4,1/2" x10 |
138-Eur |
AJMAL |
|
| 41120-73 |
Cellulose Dialyzer Tubing VT809 |
3m |
320-Eur |
Nacalai |
|
| LM-1 |
Silicon Tubing 1 mm inner diameter; 1.6 mm wall thickness _ 5 meters |
1 |
84-Eur |
Capp |
|
| LM-05 |
Silicon Tubing 0.5 mm inner diameter; 1.6 mm wall thickness _ 5 meters |
1 |
84-Eur |
Capp |
|
| LM-03 |
Silicon Tubing 0.3 mm inner diameter; 1.6 mm wall thickness _ 5 meters |
1 |
109-Eur |
Capp |
|
| 800516 |
Syringe-tubing fitting assembly (PEEK) |
|
160-Eur |
Lamda |
|
| 420823-0116 |
TUBING PTFE 1_16"OD 10_FT |
Case Qty: 1 x 10 |
229-Eur |
Kleinfeld Labortechnik |
|
| CSL-GDPUMP$ |
GELDRYER PUMP - 732502 MZ 2C NT +2AK - 110V - (No Tubing) |
|
2044-Eur |
Cleaver |
|
| 479400-0022 |
Quick Disconnect for Vacuum Tubing, pkg of 5 |
Case Qty:5 x 5 |
333-Eur |
Kleinfeld Labortechnik |
|
| CSL-GDPUMP |
GELDRYER PUMP - 732502 MZ 2C NT +2AK - 230V - (No Tubing) |
|
2044-Eur |
Cleaver |
|
| CSL-GDPUMP$ |
GELDRYER PUMP - 732502 MZ 2C NT +2AK - 110V - (No Tubing) |
1 |
2249-Eur |
Cleaver |
|
| LM-2 |
Silicon Tubing 2 mm inner diameter; 1.6 mm wall thickness _ 5 meters |
1 |
87-Eur |
Capp |
|
| CSL-GDPUMP |
GELDRYER PUMP - 732502 MZ 2C NT +2AK - 230V - (No Tubing) |
1 |
2249-Eur |
Cleaver |
|
| 800115 |
Double-seal conical insert for tubing |
|
40-Eur |
Lamda |
|
| LM-4 |
Silicon tubing, 4 mm inner diameter; 1.6 mm wall thickness - 5 meters |
|
----Eur |
Capp |
|
| 869800-1305 |
"NO_OX TUBING 1_8""OD X 5 FT " Prod. Code K |
1 |
97-Eur |
Kimble chase Kontes |
|
| LM-8 |
Silicon Tubing 8 mm inner diameter; 1.6 mm wall thickness _ 5 meters |
1 |
150-Eur |
Capp |
|
| LM-6 |
Silicon Tubing 6 mm inner diameter; 1.6 mm wall thickness _ 5 meters |
1 |
124-Eur |
Capp |
|
| LM-4 |
Silicon Tubing 4 mm inner diameter; 1.6 mm wall thickness _ 5 meters |
1 |
112-Eur |
Capp |
|
| W-1000 |
Silicon Tubing (1 meter). Recommended to order 3 meters. |
1 |
49-Eur |
Capp |
recombinant |
| FN-0001 |
Filling needles (with collar), stainless steel For 0.5 and 1 mm tubing |
1 |
78-Eur |
Capp |
|
| FN-0002 |
Filling needles (with collar), stainless steel For 2 mm tubing |
1 |
78-Eur |
Capp |
|
| 800107 |
Male tubing adaptor for LAMBDA double_seal (PEEK) |
|
88-Eur |
Lambda Laboratory Instruments |
|
| FN-0004 |
Filling needles (with collar), stainless steel For 4 mm tubing |
1 |
78-Eur |
Capp |
|
| FN-0006 |
Filling needles (with collar), stainless steel For 6 mm tubing |
1 |
78-Eur |
Capp |
|
| FN-0106 |
Suction needles (with V_slot), stainless steel For 6 mm tubing |
1 |
55-Eur |
Capp |
|
| FN-0102 |
Suction needles (with V_slot), stainless steel For 2 mm tubing |
1 |
55-Eur |
Capp |
|
| FN-0104 |
Suction needles (with V_slot), stainless steel For 4 mm tubing |
1 |
55-Eur |
Capp |
|
| RELS-GDPUMP |
GELDRYER PUMP - 732502 MZ 2C NT +2AK - 230V - (No Tubing) |
|
4060-Eur |
Durviz |
|
| BS-040108-S22 |
Tubing set (all tubes with fittings except filter and aspiration tip) for unit: FTA-1 |
|
63-Eur |
Biosan |
|
| FN-0108 |
Suction needles (with V_slot), stainless steel For 8 mm tubing |
1 |
55-Eur |
Capp |
|
| RELS-GDPUMP$ |
GELDRYER PUMP - 732502 MZ 2C NT +2AK - 110V - (No Tubing) |
|
4060-Eur |
Durviz |
|
| FN-0008 |
Filling needles (with collar), stainless steel For 8 mm tubing |
1 |
78-Eur |
Capp |
|
| BS-040108-S22 |
Tubing set (all tubes with fittings except filter and aspiration tip) for unit: FTA-1 |
|
63-Eur |
Biosan |
|
| 420823-0018 |
"TUBING PTFE 1_8""OD 10_FT " Prod. Code K |
1 |
85-Eur |
Kimble chase Kontes |
|
| 420823-0014 |
"TUBING PTFE 1_4""OD 10_FT " Prod. Code K |
1 |
137-Eur |
Kimble chase Kontes |
|
| FN-0101 |
Suction needles (with V_slot), stainless steel For 0.5 and 1 mm tubing |
1 |
55-Eur |
Capp |
|
| 800030 |
Fermentor head: Air input tubing holder (PEEK) |
|
85-Eur |
Lamda |
|
| W-1000 |
Silicon Tubing (1 meter). Recommended to order 3 meters. |
|
42-Eur |
Capp |
|
| 479215-0152 |
TUBING REINFORCED VACUUM Prod. Code P |
1 |
88-Eur |
Kimble chase Kontes |
|
| TBNG10 |
1_8 inch OD stainless steel tubing. Coil of 10 feet. |
|
171-Eur |
Next Advence |
|
| 4815-1 |
Peristaltic & Syringe Pumps spare parts: Silicone tubing 0.5_2.5 mm x 10 m |
|
52-Eur |
Lamda |
|
| RT-T1 |
MicroRT Tubing Kit contains 20 polyester tubes sealed at one end, a razor blade, and grease |
1Kit |
101-Eur |
Jena Bioscience |
assays |
| 4815-2 |
Peristaltic & Syringe Pumps spare parts: Silicone tubing 1_3 mm x 10 m |
|
52-Eur |
Lamda |
|
| 4815-3 |
Peristaltic & Syringe Pumps spare parts: Silicone tubing 2_4 mm x 10 m |
|
55-Eur |
Lamda |
|
| 4815-4 |
Peristaltic & Syringe Pumps spare parts: Silicone tubing 3_5 mm x 10 m |
|
55-Eur |
Lamda |
|
| 4815-5 |
Peristaltic & Syringe Pumps spare parts: Silicone tubing 4_6 mm x 10 m |
|
55-Eur |
Lamda |
|
| 800107 |
Male tubing adaptor for LAMBDA double-seal (PEEK) |
|
62-Eur |
Lamda |
|
| CTOOL1 |
Ceramic tool for cleaving fused silica capillary tubing. |
|
56-Eur |
Next Advence |
|
| 4815-3v |
Peristaltic & Syringe Pumps spare parts: Viton tubing 2_4 mm x 5 m |
|
107-Eur |
Lamda |
|
| 4815-4v |
Peristaltic & Syringe Pumps spare parts: Viton tubing 3_5 mm x 5 m |
|
107-Eur |
Lamda |
|
| 420823-0116 |
"TUBING PTFE 1_16""OD 10_FT " Prod. Code K |
1 |
71-Eur |
Kimble chase Kontes |
|
| 6922 |
OMNICOLL fraction collector_sampler, programmable spare parts: Magnetic tubing guide |
|
103-Eur |
Lamda |
|
| 800113 |
Peristaltic & Syringe Pumps spare parts: Stainless steel tubing clamp |
|
43-Eur |
Lamda |
|
| 6916 |
OMNICOLL fraction collector_sampler, programmable spare parts: PTFE tubing ext. diam. 1.8 mm (5 m) |
|
50-Eur |
Lamda |
|
| 6925 |
OMNICOLL fraction collector_sampler, programmable spare parts: O-ring for tubing fixing (5 pces) |
|
38-Eur |
Lamda |
|
| RT-T1 |
Laboratory supplies and fixtures: MicroRT Tubing Kit contains 20 polyester tubes sealed at one end, a razor blade, and grease |
1Kit |
101-Eur |
Jena Bioscience |
|
| 109A 11-06000 |
Barvap 6, 6 position unheated bar evaporator, with six 4" bent needles, needle valve and 3' of 1_4" tubing |
|
175-Eur |
Glcol |
|
| 109A 11-06000 |
Barvap 6, 6 position unheated bar evaporator, with six 4" bent needles, needle valve and 3' of 1 4" tubing |
|
153-Eur |
Glcol |
|
| 109A 11-12000 |
Barvap 12, 12 position unheated bar evaporator, with 12 - 4" bent needles, 2 needle valves and 2 - 3' pieces of tubing |
|
213-Eur |
Glcol |
|
| 800011-f |
Additional pump line e.g. for feed (MULTIFLOW, reagent bottle with pipes, fittings, filter, tubing) |
|
2457-Eur |
Lambda Laboratory Instruments |
|
| 800011-h |
Additional pump line e.g. for harvest (PRECIFLOW, reagent bottle with pipes, fittings, filter, tubing) |
|
1907-Eur |
Lambda Laboratory Instruments |
recombinant |
| CAP-75 |
Common capillary tubing for generation of LC_MS columns for protein profiling. 75um ID, 10 meter length. Includes a cleaving tool. |
|
194-Eur |
Next Advence |
|
| 800011-x |
Laboratory fermentation and cell-culture kits: Additional pump line (MAXIFLOW, reagent bottle with pipes, fittings, filter, tubing) |
|
2832-Eur |
Lamda |
|
| 800011-h |
Laboratory fermentation and cell-culture kits: Additional pump line (HIFLOW, reagent bottle with pipes, fittings, filter, tubing) |
|
2572-Eur |
Lamda |
|
| HPREG |
High Pressure Regulator, 100 - 1500 psi operating pressure, accepts 1_8 tubing |
|
645-Eur |
Next Advence |
|
| CSL-CHILLER |
Chiller System, -20 - 100oC, inc tubing & clips - 240V |
|
2617-Eur |
Cleaver |
|
| CSL-CHILLER$ |
Chiller System, -20 - 100oC, inc tubing & clips - 115V |
|
2617-Eur |
Cleaver |
|
| 800086 |
Out-gas condenser cylinder for Peltier out-gas condenser with tubing connection |
|
225-Eur |
Lamda |
|
| RELS-CHILLER |
Chiller for Electrophoresis systems (No tubing supplied) |
|
4766-Eur |
Durviz |
|
| 800011-p |
Laboratory fermentation and cell-culture kits: Additional pump line e.g. for harvest (PRECIFLOW, reagent bottle with pipes, fittings, filter, tubing) |
|
1792-Eur |
Lamda |
|
| 800011-m |
Laboratory fermentation and cell-culture kits: Additional pump line e.g. for feed (MULTIFLOW, reagent bottle with pipes, fittings, filter, tubing) |
|
2182-Eur |
Lamda |
|
| CSL-CHILLER |
Chiller for Electrophoresis systems (No tubing supplied) |
1 |
2637-Eur |
Cleaver |
|
| ADPT-ISOto1/8 |
For use on pressure regulators that have a 1_4 inch ISO female outlet (typically metric countries). This adapter will allow you to connect 1_8 inch stainless steel tubing to the regulator. |
|
73-Eur |
Next Advence |
|
| FRIT-KIT |
Includes formamide, Kasil-1, Kasil-1624 and a cleaving tool. Use this kit to generate porous filters in fused silica capillary tubing to enable packing. |
|
94-Eur |
Next Advence |
|
| PC1000 |
Pressure cells are ideal for packing LC_MS columns and loading MS. The PC1000 has a transparent body (1000 psi max) and comes with a FRIT-KIT, hex wrench and 10 ferrules for capillary tubing. |
|
1319-Eur |
Next Advence |
|
| PC77 |
Pressure cells are ideal for packing LC_MS columns and loading MS. The PC77 has a stainless steel body (2500 psi max) and comes with a FRIT-KIT, hex wrench and 10 ferrules for capillary tubing. |
|
955-Eur |
Next Advence |
|
| RTSK-1 |
MicroRT Room Temperature Starter Kit, Containing one MicroRT Tubing Kit (RT-T1), one MicroRT Aligner (RTA-1), ten reusable goniometer bases (GB-B3S-R), one Dual-Thickness MicroMount Assortment Box wi |
1 kit |
440-Eur |
MiTeGen |
|
| RTSK-1 |
MicroRT Room Temperature Starter Kit, Containing one MicroRT Tubing Kit (RT-T1), one MicroRT Aligner (RTA-1), ten reusable goniometer bases (GB-B3S-R), one Dual-Thickness MicroMount Assortment Box wit |
kit |
440-Eur |
MiTeGen |
|
| RTSK-1 |
MicroRT Room Temperature Starter Kit, Containing one MicroRT Tubing Kit (RT-T1), one MicroRT Aligner (RTA-1), ten reusable goniometer bases (GB-B3S-R), one Dual-Thickness MicroMount Assortment Box wi |
kit |
468-Eur |
MiTeGen |
assays |
| PC77-MAG |
Pressure cells are ideal for packing LC_MS columns and loading MS. The PC77 has a stainless steel body (2500 psi max) and comes with a FRIT-KIT, hex wrench and 10 ferrules for capillary tubing. Equi |
|
1410-Eur |
Next Advence |
|
| PACK-KIT |
Starter kit for pressure cells to allow for column packing. Includes: HPREG (high pressure regulator), TBNG10 (ten feet of stainless tubing), CAP-75 (ten meters of capillary), and STRB5X2 (stir bar). |
|
901-Eur |
Next Advence |
|
| RTSK-1 |
MicroRT Room Temperature Starter Kit, Containing one MicroRT Tubing Kit (RT_T1), one MicroRT Aligner (RTA_1), five reusable goniometer bases (GB_B3S_R), one Dual_Thickness MicroMount Assortment Box w |
1 kit |
480-Eur |
MiTeGen |
assays |
| 800108 |
Device for sterile sampling (support, glass sampling device, syringe filter, 3 clamps and tubing) |
|
186-Eur |
Lambda Laboratory Instruments |
|
| 800086 |
Out_gas condenser cylinder for Peltier out_gas condenser with tubing connection |
|
282-Eur |
Lambda Laboratory Instruments |
|